SL L4-1.9L SOHC VIN 9 (1991)
11.
Remove foam filler at rear of door at belt.
12.
Using an 8 inch flat bladed screwdriver, place tip of blade at location on side door latch assembly as shown.
13.
Tap screwdriver downward, piercing through plastic housing. This will cause side door latch assembly to release, allowing the door to open.
14.
Install foam filler at rear of door at belt.
15.
Replace stationary window according to procedures in the "Doors" section of the "Body/Collision Repair Service Manual." Disregard step 5 of the
service manual installation procedure.
16.
Install inner door trim panel at the top.
17.
Install inner sealing strip.
18.
Replace damaged side door latch assembly according to procedures in the "Doors" section of the "Body/Collision Repair" Service Manual."
PARTS REQUIREMENTS:
CLAIM INFORMATION:
