SL L4-1.9L SOHC VIN 9 (1991)
bearing plate.
Remove handle and plate.
5. Remove screws and door pull cup.
6. Remove inner belt sealing strip.
7. On Coupe, remove screw from rear of trim panel.
8. Disengage door trim panel retainers from door assembly with a trim panel tool and remove panel assembly.
INSTALLATION
1. Install door trim panel by engaging all retainers into door assembly and then pressing firmly at panel retainer locations.
2. Install door pull clip with screws. Tighten screws.
3. Install manual window regulator handle clip on handle.
Install bearing plate and handle with handle pointed in a forward and slightly up position with window closed.
NOTICE: If trim panel fasteners do not retain trim panel snuggly to the door, a rattle or buzz will occur. If greater retention is required, use
fastener # 21042104.
