SL L4-1.9L SOHC VIN 9 (1991)
11. If damaged, remove foam tape fillers at the front edge of outer door panel.
12. If replacing panel:
a. On 1991 and 1992 vehicles, remove rivets by pushing mandrel out with punch and remove outer door panel lower sealing strip.
b. Remove door lock cylinder bezel compressing retainer tabs and pushing out.
c. Remove J-clips.
d. Remove trim molding and clip.
INSTALLATION
1. If replacing panel:
a. Install clip and trim molding.
b. Install J-clips.
c. Install door lock cylinder bezel.
d. Install outer door panel lower sealing strip with rivets.
2. Install foam tape fillers at front edge of outer door panel in locations shown in illustration. Using Kent Industries P/N 40130 1/2" x 9/16" or
equivalent cut to length and align foam tape to scribe lines on outer door panel for the following:
a. Sedan: A = 50mm (1.97 in.),
B = 120mm (4.72 in.), on piece "B" trim 5mm (0.197 in.) of thickness from area indicated by arrow.
