SL L4-1.9L SOHC VIN 9 (1991)
1.
Remove door trim panel.
2.
Remove retainers from door trim panel.
3.
Count the number of retainer locations on door trim panel and cut the same number of 24.4 mm (1 in.) squares from the loop portion of 3M Hook
and Loop material (P/N 06480) or equivalent.
4.
Using scissors, cut a 3 mm (1/8 in.) slot, 16 mm (5/8 in.) deep in center of each square of loop material.
5.
Install loop material over retainer housings.
6.
Install replacement retainers (P/N 21042104).
7.
Install door trim panel.
PARTS REQUIREMENTS:
21042104
Retainer-Side Door Trim
CLAIM INFORMATION: