saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Power Door Locks - Unintentional Activation|Page 8396 > < Power Door Locks - Unintentional Activation|Page 8387
Page 1
background image

Power Door Lock Switch: Customer Interest
Power Door Locks - Unintentional Activation

NO.:

91-T-27

DATE:

July, 1991

GROUP:

Electrical

CORP NO.:

181606

SUBJECT:

Unintentional Activation of Power Door Locks (Replace Power Door Lock Switch) All 1991 Saturns with Power Door Locks

CONDITION:

Some customers may comment that the power door lock switches are easily "bumped" or "locked" when they are using the inner door
latch handle to open the door.

CAUSE:

Switch lever extends beyond bezel.

CORRECTIVE
ACTION:

Replace both left and right power door lock switches with a new switch and bezel. Refer to the following procedures for removal and
installation of the power door lock switches.

PROCEDURE:

1.

Remove door lock switch by carefully pulling out from clip location on upper edge of switch bezel. Do not use instruments that may damage
trim.

2.

Disconnect electrical connector and remove switch from vehicle.

3.

Connect electrical connector to new switch.

4.

Install by first inserting the bottom edge (clip) of the switch and then snapping in the clip at the upper edge.

PARTS
REQUIREMENTS:

Model 
Codes

21021289

Switch Asm-Door Lock

A69

21021302

Switch Asm-Door Lock

B27

CLAIM
INFORMATION:

To receive credit for this repair, submit a claim through the Saturn Dealer System as follows:

Labor

Case

Operation

Power Door Locks - Unintentional Activation|Page 8396 > < Power Door Locks - Unintentional Activation|Page 8387