SL L4-1.9L SOHC VIN 9 (1991)
5.
Connect replacement power door lock relay to wiring harness.
6.
Tape relay to vehicle wiring harness. Make sure to position the relay with wires facing downward to prevent moisture intrusion.
7.
Install center console using the procedures in the "Instrument Panel and Console" section of the "Body/Collision Repair Service Manual."
8.
Connect negative battery terminal and reset clock.
Torque: 17 N-m (151 in.lbs.)
9.
Perform a system check on the power door lock system
PARTS REQUIREMENTS:
12088519
Power Door Lock Relay
CLAIM INFORMATION:
To receive credit for this repair (warranty repairs only), submit a claim through the Saturn Dealer System as follows: (see illustration)
