saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < Radiator Hose - Coolant Weeps or Drips at Connections
Page 1
background image

Radiator Hose: All Technical Service Bulletins
Radiator Hose - Coolant Weeps or Drips at Connections

BULLETIN NO.: 95-T-04

ISSUE DATE: January 1995

GROUP/SEQ. NO.: Engine-03

CORPORATION NO.: 586201

SUBJECT:
Engine Coolant Weeps or Drips at Radiator Hose Connections (Replace Radiator Hose Clamps)

MODELS AFFECTED:
1991-1994 Saturns

CONDITION:
Engine coolant weeps or drips at radiator hose connections.

CAUSE:
Radiator hose clamps may not provide adequate clamp load on the radiator hose connections during all temperature conditions, allowing engine coolant
to weep or drip.

CORRECTION:
If engine coolant weeps or drips are detected at any of the four radiator hose connections, replace the radiator hose clamps with radiator inlet hose clamp
(P/N 21030894).

Torque: 3 Nm (27 in.lbs.)

Note: 

The radiator inlet hose clamp (P/N 21030894) is a spring-type clamp and can be used at the following locations if the engine coolant weeps or drips
at radiator hose connections.

^

Lower radiator hose to radiator

^

Lower radiator hose to thermostat housing

^

Upper radiator hose to radiator

^

Upper radiator house to cylinder head outlet

PARTS REQUIREMENTS:
21030894

Clamp-Rad Inl Hose

CLAIM INFORMATION:
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System using the appropriate labor
operation and time for the work performed.

Relays and Modules - Cooling System > < Radiator Hose - Coolant Weeps or Drips at Connections