saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Brakes - Park Brake Cables Hang Down Below Vehicle|Page 1912 > < Brakes - Park Brake Cables Hang Down Below Vehicle|Page 1910
Page 4
background image

2.

Inspect position of protective pipe clips or brake pipe armor. Reposition if necessary to fully separate brake pipes and left park brake cable as
shown in illustration.

3.

Push base of new tie strap (P/N 25518466) into underbody hole.

4.

Fasten tie strap around the park brake cable, and pull end of tie strap until cable is secure.

5.

Use side cutters or end cutters to remove excess tie strap.

PARTS
REQUIREMENTS:
21010764 - Clips (2) 
25518466 - Straps Parking Brake Cable (2)

CLAIM
INFORMATION:
To receive credit for this repair, submit a claim through the Saturn Dealer System as follows:

Brakes - Park Brake Cables Hang Down Below Vehicle|Page 1912 > < Brakes - Park Brake Cables Hang Down Below Vehicle|Page 1910