saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

All Other Service Bulletins for Idler Pulley: > < A/C Control Lever - Revised Adjustment Procedures|Page 2021
Page 3
background image

a.

Move mode lever to the full vent position and the temperature lever to the full cold position. Hold the cables about two seconds, then release.
The centerline of the lever knobs should not be past the centerline of the second temperature bar, as shown in the illustration.

b.

Repeat Step 7a with the mode lever at the full defrost position and the temperature lever at the full hot position.

8.

Install radio:

a.

Position radio into instrument panel, connect electrical connectors and antenna.

b.

Align radio and install four screws.

9.

Install center air outlet/trim panel by pushing in at clip locations.

10.

Connect negative battery cable.

11.

Set clock to proper time.

CLAIM INFORMATION:

To receive credit for this repair, submit a claim through the Saturn Dealer System

All Other Service Bulletins for Idler Pulley: > < A/C Control Lever - Revised Adjustment Procedures|Page 2021