SL L4-1.9L SOHC VIN 9 (1991)
4.
Position temperature lever in the full cold position and the mode lever in the full vent position. (NOTE: This procedure was previously performed
in the full defrost position.)
5.
Align cables in grooves and snap hold down adjustment clips over temperature and mode cables.
6.
Check temperature and mode lever for full travel and no backlash. Adjust each lever if necessary by pushing the lever to the side that springs back.
While holding slight pressure against the lever, open the hold-down adjustment clip. Adjust the cable and close the hold-down adjustment clip.
7.
Verify adjustment:
