SL L4-1.9L SOHC VIN 9 (1991)
Canister Purge Solenoid: Service and Repair
Evaporative Emission Canister Purge Solenoid
Cannister Purge Solenoid - Typical Location.
Cannister Purge Valve.
CAUTION: On vehicles equipped with a SIR system, disable the SIR system. SEE SERVICE PRECAUTIONS/ VEHICLE DAMAGE
WARNINGS/ DISABLING-ENABLING THE SIR SYSTEM.
REMOVAL
1.
Disconnect negative battery cable.
2.
Remove air cleaner assembly.
3.
Disconnect canister purge solenoid electrical connector and vacuum hose.
4.
Remove attachment bolt and canister purge solenoid.
5.
Remove air cleaner housing and clean air inlet tube/resonator assembly.
INSTALLATION
1.
Install attachment bolt and canister purge solenoid.
^ Torque: 25 Nm (19 ft lbs)
NOTE: Make sure that hoses are firmly seated. Check for vacuum leaks after assembly.
2.
Connect electrical connector to canister purge solenoid. Push in connector until a click is heard and pull back to confirm a positive engagement.
