SL L4-1.9L SOHC VIN 9 (1991)
NOTICE:
Start at the bottom clips and work up to the top clips. Do not use any instrument that may damage the trim panel.
7.
Carefully remove center air outlet/trim panel by pulling outward at clip location.
8.
Open the glove box.
9.
Remove screws and pull cluster trim panel rearward to disengage retainers.
10.
Remove connector position assurance (CPA) devices and disconnect the electrical connectors from the instrument panel lighting and rear window
defogger switches.
11.
Remove the cluster trim panel.
12.
Remove screws and pull instrument cluster assembly out enough to disconnect electrical connectors.
13.
Disconnect electrical connectors, by depressing the retainer tabs, and remove the instrument cluster assembly.
