saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Keyless Entry/Security System - Information|Page 25 > < Keyless Entry/Security System - Information|Page 23
Page 16
background image

Circuit 155ZZ

Location:
Connects left body splice pack connector cavity A to chassis ground point N.

Type:
Black 18 gage wire.

Check for OPENS/SHORTS

Repair as needed.

If this component is good, go to the next item indicated on the chart.

POWER CIRCUITS

Circuit 1936

Location:
Connects the underhood junction block connector cavity A to the I/P junction block connector cavity F6.

Type:
Red/White 14 gage wire.

Function:
This circuit supplies battery voltage to the I/P junction block.

Check for OPENS/SHORTS.

Repair as needed.

If this component is good, go to the next item indicated on the chart.

Circuit 1932

Location:
Connects the underhood junction block connector cavity C to the Ignition switch connector cavity A.

Type:
Red/Lt Green 14 gage wire

Function:
This circuit supplies battery voltage to the Ignition switch.

Check for OPENS/SHORTS

Repair as needed.

If this component is good, go to the next item indicated on the chart.

Circuit 340

Location:
Connects the I/P junction block connector cavity F7 to the Security system module connector cavity B1 through a 5A fuse and to the security system
module connector cavity A8 through a 20A fuse.

Type:
Red/Black 20 gauge wire

Function:
This circuit supplies fused battery voltage to the Security system module.

Check for OPENS/SHORTS

Repair as needed.

Keyless Entry/Security System - Information|Page 25 > < Keyless Entry/Security System - Information|Page 23