SL L4-19L Transmission Mode Switch Diagram - Page 5313
Transmission Mode Switch: Testing and Inspection
Connect Scan tool, ignition On/engine Off. Select general information from TCM menu. (Saturn Scan Tool referenced. Check with your scan tool
manufacturer for compatibility)
^
Scan tool should indicate position of switch.
^
Tool display should change when going from Perf to Norm modes.
^
The PCM supplies 12 volts to terminal J3E3 (Circuit 1224B). When Perf is selected, the switch will ground circuit 1224B.
^
If the Scan tool always reads Perf. regardless of switch position, check for a grounded circuit 1224B. If switch always indicate Norm, check for an
open in circuit 1224B