SL L4-1.9L SOHC VIN 9 (1991)
5. Place inner panel cam (rear of new front side door window regulator assembly) into opening in inner door panel, before riveting front side door
window regulator assembly into place.
6. Position front side door window regulator assembly backplate to inner door panel and install rivets.
7. On the inside of the inner door panel, mark a horizontal line 15 mm (0.60 in.) above and 7 mm (0.28 in.) below existing hole in inner door panel.
8. Insert a china marker into the hole of the inner panel cam and using the inner panel cam as a compass, move the inner panel cam up and down, past
the horizontal lines marked in step 7.
