SL2 L4-1.9L DOHC VIN 7 (1997)
Exhaust Manifold: Service and Repair
REMOVAL
1. Raise vehicle squarely on a lift. Refer to lift instructions for positioning vehicle.
WARNING: Make sure vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist,
provide additional support for the vehicle on the opposite end from which components are being removed. Make sure hoist does not
contact fuel or brake lines.
2. Remove front exhaust pipe-to-exhaust manifold fasteners, lower front exhaust pipe, remove gasket and discard.
3. Lower vehicle.
4. Remove the A/C compressor and the rear compressor bracket. See Heating and Air Conditioning.
5. Remove the two front exhaust pipe to engine stiffening bracket fasteners.