SW L4-1.9L DOHC VIN 7 (1993)
-
Coupe, built after and including VIN PZ317192, proceed to step 9.
-
Sedan or Wagon, built after and including VIN PZ317192, proceed to step 10.
^
If waterleak is still present and the vehicle does not fall into the years or VIN ranges given in the previous step, repeat steps 3 through 7 until
waterleak is repaired.
9.
On Coupes:
a.
Make sure door opening space frame lap joints are clean and dry.
IMPORTANT:
Some vehicles may have black tape over existing sealer. Remove and discard this black tape before applying new sealer.
b.
Using a seal sealer such as Kent Industries *High Tech Leak Check Seam Sealer, Black (P/N 10070)* or equivalent, fill the two space frame
lap joints until flush with the space frame using a flat-bladed tool to keep the sealer smooth.
c.
Allow the sealer to completely dry and water test to make sure waterleak has been repaired.
^
If waterleak is still present, repeat steps 3 through 7 until waterleak is repaired.
^
If waterleak has been repaired, return vehicle to customer.
10.
On Sedan or Wagon:
a.
Make sure door opening space frame lap joint is clean and dry.
IMPORTANT:
Some vehicles may have black tape over existing sealer. Remove and discard this black tape before applying new sealer.
b.
Using a seal sealer such as Kent Industries *High Tech Leak Check Seam Sealer, Black (P/N 10070)* or equivalent, fill the one space frame
lap joint until flush with the space frame using a flat-bladed tool to keep the sealer smooth.