SW L4-1.9L DOHC VIN 7 (1993)
Oil Pan: Service and Repair
OIL PAN REMOVAL - IN-CHASSIS
IMPORTANT: Disassembly of components sealed with RTV requires that specific procedures be followed. RTV cutter tool SA9123E is required for
oil pan removal.
1. Remove the front exhaust pipe.
2. On a 1991 powertrain, remove the engine stiffening bracket and flywheel cover.
3. Remove the right-hand side tire, splash shield and vibration damper.
4. Loosen the four front motor mount bolts. Back out the bolts approximately 12 mm (1/2 in.).
5. Remove all the oil pan bolts.