SW L4-1.9L DOHC VIN 7 (1993)
Blower Motor: Service and Repair
1.
On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING.
2.
Disconnect battery ground cable.
3.
Remove right instrument panel lower sound insulator, if equipped.
4.
Disconnect blower motor electrical connector.
5.
Remove blower motor three attaching screws, then remove motor.
6.
Reverse procedure to install.
7.
On models equipped with airbag, rearm airbag system.
