SW L4-1.9L DOHC VIN 7 (1993)
The MAP sensor measures the intake manifold pressure. Engine vacuum is related to engine load and speed changes. A high vacuum signal
indicates a low intake manifold pressure. A low vacuum signal indicates a high intake manifold pressure. The higher the pressure signal, the
greater the load being placed on the engine.
The MAP sensor voltage is scaled by the PCM to pressure (kPa or psi). A high pressure (atmospheric pressure) produces an output of 4.5 volts to
5.0 volts, about 95-105 kPa (14-15 psi). A low pressure (engine vacuum) produces about 0.5 volts to 0.90 volts, about 37-50 kPa (5-7 psi). The
MAP sensor is also used to calculate barometric pressure under certain conditions.
By monitoring the MAP sensor output voltage signal, the PCM determines the manifold pressure and can increase or decrease the injector "ON"
time (or pulse width). The PCM also uses the MAP sensor signal to help control ignition timing.
LOCATION
The manifold absolute pressure (MAP) sensor is mounted on the intake manifold.
