SW L4-1.9L DOHC VIN 7 (1993)
pintle.
2.
Insert IAC valve in throttle body.
3.
Apply SATURN P/N 21485277 (Loctite 242 or equivalent) to the attachment screw threads. Install IAC valve attaching screws.
^ Torque: 3.2 Nm (28 in lbs)
NOTE: No physical adjustment of the IAC valve assembly is required after installation. Proper positioning can be assured by temporarily removing
the PCM fuse or disconnecting the battery negative terminal. This provides a reference position for the PCM to reset the IAC valve setting.
