SW L4-1.9L DOHC VIN 7 (1993)
Neutral Safety Switch: Service and Repair
Neutral Safety/Selector Switch
Neutral Safety Switch Adjustments
Transaxle Connectors
REMOVAL
1. Remove air induction tube.
a. Remove the air filter box. Lift the resonator upward to disengage it from the support bracket.
2. Disconnect electrical connectors from selector switch.
3. Disconnect shifter cable from control lever.
4. Remove retaining nut from control lever shaft and remove manual lever. Note lever position.
5. Remove two selector switch-to-transaxle case bolts and remove switch.
