SW L4-1.9L DOHC VIN 7 (1993)
Shift Indicator: Description and Operation
PCM Wiring.
PURPOSE
The upshift telltale is used, on vehicles equipped with a manual transaxle, to signal the driver to upshift. On vehicles equipped with an automatic
transaxle, a Shift to D2 indicator lamp is used to signal when there is a problem within the transaxle controller, contained within the PCM.
CIRCUIT OPERATION
To turn on either indicator lamp, the PCM will supply a ground allowing current to flow through the lamp, turning it "ON".
COMPUTER DIAGNOSTICS
When the diagnostic connector terminals A and B are grounded, the diagnostic trouble codes can be read by counting the number of flashes of the
SERVICE ENGINE SOON lamp for PCM/EC (Engine) diagnostic trouble codes or the SHIFT TO D2 lamp on 1991 and 1992 vehicles (or the
LOW COOLANT/HOT lamp on 1993 and 1994 vehicles) for PCM/TC (Transmission) trouble codes.