SW L4-1.9L DOHC VIN 7 (1993)
Window Regulator: Service and Repair
Rear Door
WINDOW REGULATOR/MOTOR
REMOVAL
1. Remove inner door trim panel.
2. Remove outer door panel.
3. Remove glass. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door Glass Replacement
4. Disconnect harness on power regulator.
5. Drill out regulator rivets and remove regulator.
INSTALLATION
1. Install regulator with rivets.
2. Connect harness on power window regulator.
3. Install door glass.
4. Install outer door panel.
5. Install inner door trim panel.