saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Diagrams|Page 125
Page 3
background image

3. Connect four sunroof drain hoses to sunroof module. Make sure hoses are not kinked.

4. On Coupe, connect body wiring harness to sunroof relay box harness and install CPA device.

5. Connect sunroof wiring harness connector to sunroof switch in map lamp on roof console assembly base and install map lamp base.

6. Install headliner as outlined in "Headliner Installation" procedure.

7. Adjust sunroof glass to 1 mm (0.040 in.) below roof surface at front and 1 mm (0.040 in.) above roof surface at rear by loosening sunroof glass

attaching screws and moving sunroof glass.

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Diagrams|Page 125