SW2 L4-1.9L DOHC VIN 7 (1997)
4. Lower rear seat back.
5. Remove body lock trim finish molding by pulling firmly, starting at the bottom of the molding to disengage clips.
6. Slide molding out from under body lock pillar upper trim finish molding.
Remote Control Door Lock (RKE) Module Installation
7. Disconnect Remote Control Door Lock or Remote Keyless Entry (RKE) module connector.
8. Pull firmly on remote control door lock (RKE) module from the top to bottom, to disengage dual-lock.
9. Remove remote control door lock (RKE) module.
