SW2 L4-1.9L DOHC VIN 7 (1997)
Keyless Entry Module: Service and Repair
Installation
Remote Control Door Lock (RKE) Module Installation
1. Install Remote Control Door Lock or Remote Keyless Entry (RKE) module.
2. Connect electrical connector.
Remote Control Door Lock (RKE) Module Installation
3. Slide body lock trim finish molding upper tab into the body lock pillar upper trim finish molding.
4. Line up attaching clips and firmly snap body lock trim finish molding into place.
IMPORTANT: Outboard clip of the body lock pillar trim finish molding must be positioned under weather-strip after installation.
