SW2 L4-1.9L DOHC VIN 7 (1997)
Brake Pad: Service and Repair
Replacement
WARNING: Make sure vehicle is properly supported and squarely positioned on hoist. To help avoid personal injury, provide additional
support to the end of the vehicle opposite that from which components will be removed.
CAUTION: Never replace brake pads on one side of axle only. Left and right side brake pads must be replaced only as axle sets.
REMOVAL
1. Raise vehicle on hoist.
2. Remove front road wheels.
3. Remove caliper lock pin.
4. Pivot caliper body up, around guide pin.
5. Remove inboard and outboard brake pads from caliper support.
6. Remove two pad clips from caliper support.
7. Inspect:
a. Lock pin and guide pin boots for deterioration. If damaged, replace.