SW2 L4-1.9L DOHC VIN 7 (1997)
Backing Plate: Service and Repair
REMOVAL
1. Disassemble rear drum brake components.
2. Disconnect brake hose at wheel cylinder and remove wheel cylinder.
3. Remove parking brake cable.
4. Remove four hub and bearing assembly-to-knuckle bolts and remove hub and bearing assembly and backing plate from knuckle.
INSTALLATION
1. Position hub and bearing assembly and backing plate to knuckle and install four fasteners.
^
Torque to 85 Nm (63 ft. lbs.)
2. Install parking brake cable.
3. Install wheel cylinder and brake hose.
4. Completely assemble rear drum brake mechanism.
