SW2 L4-1.9L DOHC VIN 7 (1997)
21. With SA9151BR or equivalent, remove park brake cable from backing plate.
22. Remove park brake cable from vehicle.
Installation
1. Install park brake cable through backing plate until retaining fingers are correctly seated against backing plate.
2. Install park brake cable spring onto the park brake cable and install cable to lever.
NOTE: Check that park brake cable end is correctly seated in park brake lever.
3. Install short end of upper return spring into back of hole in leading brake shoe.
4. Stretch upper return spring to install other end of spring into the back of the park brake shoe.
NOTE: Check that park brake shoe is correctly engaged (in wheel cylinder on top, anchor on bottom).