SW2 L4-1.9L DOHC VIN 7 (1997)
5. Remove right wheelhouse side splash shield.
6. Place a 1 inch x 1 inch x 2 inch long block of wood between the torque strut and cradle.
NOTE: Installation of the wood block prior to upper engine torque axis mount removal allows the mount to be easily installed without lifting or
jacking the powertrain.
7. Move heater outlet clamp and hose from heater core outlet pipe.
WARNING: To prevent personal injury, do not stand under heater core outlet when removing hose because some coolant will leak out
after hose is removed.
