SW2 L4-1.9L DOHC VIN 7 (1997)
Coolant Line/Hose: Service and Repair
Heater Core to Pipe Hose
REMOVAL
1. Use hacksaw to cut crimp ring.
CAUTION: Cut only deep enough to separate crimp ring. Take care not to cut pipe.
NOTE: When cutting crimp ring, cut at 30 degree angle to centerline of hose.
2. Use a flat head screwdriver to separate and remove crimp ring from hose.
3. Remove heater hose from pipe.
INSTALLATION
1. Install thermostat hose on pipe.
2. Install new clamp on hose. Position clamp at 11 o'clock.