SW2 L4-1.9L DOHC VIN 7 (1997)
7. Remove the two camshaft sprocket pilot bolts while holding the camshaft(s) with a 21 mm or 7/8 inch wrench.
8. Install the camshaft sprocket retaining bolts and washers. Hold the camshaft with a 21 mm or 7/8 inch wrench and torque the bolts.
Torque to 103 Nm (76 ft. lbs.).
CAUTION: Verify camshafts are properly timed prior to starting engine.
9. Install cam cover assembly, PCV/fresh air hoses, accessory drive belt, EGR valve solenoid, and spark plug wires.
Torque to 10 Nm (89 inch lbs.).
