SW2 L4-1.9L DOHC VIN 7 (1997)
Connecting Rod: Service and Repair
Disassemble
1. Check fit between piston and pin. Try to move the piston back and forth on the piston pinch If any movement is felt, measure the piston pin to
piston and connecting rod clearances.
Piston Pin to Piston:
^
Standard: 0.002-0.011 mm (0.0001-0.0004 inch).
^
Service Limit: 0.011 mm (0.0004 inch) max.
Piston Pin to Connecting Rod:
^
Standard: 0.006-0.024 mm (0.0002-0.0009 inch).
^
Service Limit: 0.024 mm (0.0009 inch) max.
2. Remove piston rings:
a. Using a piston ring expander, remove the compression rings.
b. Remove oil ring by hand.
