SW2 L4-1.9L DOHC VIN 7 (1997)
Front Engine Plate: Service and Repair
Overhaul
DISASSEMBLE
1. Remove drive and driven rotors:
a. Remove the cover plate screws.
NOTE: An impact driver and T-30 TORX are required to break the oil pump screws loose.
CAUTION: The oil pump cover screws are coated with a sealant to prevent oil leakage. New screws must be installed if they are removed.
b. Mark the drive rotor and driven rotor with a felt pen. Remove the drive rotor and driven rotor.
