SW2 L4-1.9L DOHC VIN 7 (1997)
Engine Mount: Service and Repair
Engine Mount Midrail Bracket
Removal
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL
BE REMOVED FROM.
1. Raise vehicle on a hoist.
2. Remove the right front road wheel.
3. Remove the right upper wheelhouse panel.
4. Lower the vehicle enough to allow underhood access to engine mount.
5. Remove the two engine mount-to-midrail bracket fasteners.