SW2 L4-1.9L DOHC VIN 7 (1997)
5. Lower the powertrain completely.
6. Install new engine mount-to-midrail bracket nuts.
-
Torque: 50 Nm (37 ft. lbs.)
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS
WILL BE REMOVED FROM.
7. Raise vehicle on a hoist.
8. Loosen the two engine strut bracket-to-cradle fasteners to remove any fore/aft preload from the engine strut.
9. Tighten the engine strut bracket-to-cradle fasteners.
-
Torque: 50 Nm (37 ft. lbs.)
