SW2 L4-1.9L DOHC VIN 7 (1997)
1. Position the engine mount to the front cover and install new nuts.
-
Torque: 50 Nm (37 ft. lbs.)
NOTICE: When lowering the powertrain, it will be necessary to guide the mount over the midrail bracket studs to prevent damage to the stud
threads.
2. Lower the powertrain completely.
3. Install new engine mount-to-midrail bracket nuts.
-
Torque: 50 Nm (37 ft. lbs.)
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS
WILL BE REMOVED FROM.
