saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Engine Mount - Measurements/Replacement Procedures|Page 2441 > < Engine Mount - Measurements/Replacement Procedures|Page 2439

SW2 L4-1.9L DOHC VIN 7 (1997)

Page 6
background image

6.

Loosen the two engine strut bracket-to-cradle fasteners to remove any fore/aft preload from engine strut.

7.

Tighten the two engine strut bracket-to-cradle fasteners.

Torque:
Engine Strut Bracket-to-Cradle
Fasteners: 50 N.m (37 ft-lbs)

8.

Lower vehicle from hoist.

Engine Mount - Measurements/Replacement Procedures|Page 2441 > < Engine Mount - Measurements/Replacement Procedures|Page 2439