SW2 L4-1.9L DOHC VIN 7 (1997)
3. Apply a 2.0 mm (0.080 inch) diameter bead of RTV to the carrier.
CAUTION: Assemble while RTV is still wet (within three minutes). Do not wait for RTV to skin over.
4. Install the four rear crankshaft seal carrier bolts. Torque to 11 Nm (97 inch lbs.).
CAUTION: If the rear and side cylinder block oil gallery plugs have been removed, clean the threads and apply Loctite or equivalent. Do not
over-torque the plugs. Torque is 30 Nm (22 ft. lbs.).