SW2 L4-1.9L DOHC VIN 7 (1997)
CAUTION: Excess slack in the chain must be kept to the chain tensioner side (movable guide) of the cylinder block when installing timing chain
or the camshaft sprockets will not be correctly timed to the crankshaft sprocket.
f.
Make sure the silver colored link plates are located over the pip mark on the cam sprockets only. The crankshaft sprocket tooth must be
pointed directly downward at the 6 o'clock position between the two silver colored links. The pip mark on the crankshaft sprocket will be
aligned with the timing mark on the cylinder block.
CAUTION: Alignment of both timing pin holes, crankshaft sprocket pip mark with cylinder block mark, colored links with camshaft and
crankshaft sprockets must be correct to make sure the engine is properly timed.
