SW2 L4-1.9L DOHC VIN 7 (1997)
5.
Insert nozzle tip of spray gun through the drilled hole and orient so spray pattern will be parallel to the evaporator face.
6. With blower motor on m and engine Off, spray the entire contents of the disinfectant mix. Rotate the nozzle tip up and down while spraying
disinfectant to allow for an even distribution and to ensure full coverage of the evaporator.
7.
Turn blower motor Off.
8.
Allow evaporator core to soak for at least 5 minutes.
9.
With blower motor on HI, thoroughly rinse the evaporator core (using the above procedure) with 1 quart of clean water to remove any disinfectant
residue.
