SW2 L4-1.9L DOHC VIN 7 (1997)
Compressor Clutch: Service and Repair
Clutch Removal
REMOVAL
IMPORTANT: It is not necessary to discharge the A/C system to service the A/C compressor clutch.
1. Loosen accessory drive tensioner and remove accessory drive belt from A/C compressor pulley.
2. Disconnect A/C compressor clutch electrical connector.
3. Remove rear A/C compressor-to-engine bracket bolts.
4. Remove front A/C compressor-to-engine bracket bolts.
5. With A/C lines still attached, lift A/C compressor upward and install one front bolt through front engine bracket top hole and bottom rear
mounting ear of A/C compressor. Tighten bolt so that the A/C compressor is supported by the bracket.