SW2 L4-1.9L DOHC VIN 7 (1997)
NOTICE:
To prevent any possibility of a short circuit, replace any tape that is pushed back or removed from any wiring harness that is moved.
16.
Disconnect black I/P harness connector and pull into driver's side footwell.
17.
Remove radio.
17.1 Depress center pins inward to release radio/HVAC control cover push pin fasteners.
IMPORTANT:
Do not push center pins through fasteners.
17.2 Remove fasteners and pull radio/HVAC control cover rearward.
17.3 Disconnect traction control-fog lamp-rear defog electrical connector, if equipped.
