SW2 L4-1.9L DOHC VIN 7 (1997)
3. Place tape around protective cover on TXV end of liquid line to keep cover from falling off during installation.
a. Hold liquid line as shown. Use pressure switch as a frame of reference.
b. Lower TXV end of line down behind the left strut tower against the cowl.
IMPORTANT: Make sure line is behind the clutch slave cylinder hose if equipped with manual transaxle.
4. Rotate line clockwise while feeding line under and behind the brake booster.
5. Continue feeding line along cowl towards the °V while lowering receiver drier end down to radiator support.
