SW2 L4-1.9L DOHC VIN 7 (1997)
Malfunction Indicator Lamp: Service and Repair
SERVICE (WRENCH) TELLTALE RESET PROCEDURE
To reset the Service (Wrench) telltale all codes must be cleared including Powertrain Control Module (PCM), Body Control Module (BCM) and
Antilock Braking System (ABS) Codes.
Clearing diagnostic trouble codes is accomplished by choosing the "Clearing Trouble Codes" option in the Scan tool DTC menu. Disconnecting the
battery for 60 seconds (and in some cases longer) will clear DTCs, active and history from PCM memory. Failure Record information will also be
cleared.