SW2 L4-1.9L DOHC VIN 7 (1997)
5. Check oil pressure. Oil Pressure:
^
At Idle: Standard is 90 kPa (13.0 psi) min. and Service Limit is 65 kPa (9.0 psi) min.
^
At 2,000 RPM: Standard is 250 kPa (36.0 psi) min. and Service Limit is 200 kPa (29 psi) min.
^
Cold (up to 2500 rpm): Standard is 560 kPa (80 psi) max.
6. Install oil pressure sensor. Torque is 35 Nm (26 ft. lbs.).
NOTE: A 19mm (3/4 inch) or 24 mm (15/16 inch) crowfoot and 3/8 inch wobble drive extension (three inches long) will allow access to the oil
pressure sending unit nut for both removal and torquing. Check for oil leakage after installing the oil pressure switch.
