SW2 L4-1.9L DOHC VIN 7 (1997)
INSTALLATION
1. Remove protective cover from suction hose.
NOTICE: Use only R-12 Refrigerant oil (mineral) to lubricate O-rings. Use of R-134a (PAG) oil will cause premature corrosion of fitting joints.
^
Lubricate O-ring with Saturn R-12 mineral refrigerant oil.
^
Install suction hose to compressor.
^
Install and torque bolt.
Torque: 25 N.m (19 ft-lbs)
2. Install suction line in vehicle. Route hose outside transaxle dip stick tube, under edge of battery tray, and under negative battery cable.
^
Remove protective cover.
NOTICE: Use only R-12 Refrigerant oil (mineral) to lubricate O-rings. Use of R-134a (PAG) oil will cause premature corrosion of fitting joints.
^
Lubricate O-ring with Saturn R-12 mineral refrigerant oil.
^
Install suction line to TXV.
^
Install and torque bolt.
Torque: 25 N.m (19 ft-lbs)
3. Install air cleaner components.
