SW2 L4-1.9L DOHC VIN 7 (1997)
7. Disconnect electrical harness from the pressure sensor.
8. Remove the bolt holding liquid line to thermal expansion valve (TXV).
WARNING: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED. TO HELP AVOID PERSONAL
INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END
FROM WHICH COMPONENTS ARE BEING REMOVED.
9. Raise vehicle.
10. Remove push nut and pull back receiver-dehydrator splash shield.
