saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABS/PCM Bracket|Page 3151 > < ABS/PCM Bracket
Page 1
background image

Engine Control Module: Service and Repair
Powertrain Control Module (PCM) Replacement

NOTE: Record preset radio stations and clock time. Disconnect negative battery cable.

REMOVAL

1. Remove I/P upper trim panel outer cover fillers by carefully lifting up at clip locations, starting at the rear above end cap.

I/P Retaining Bolt Caps

2. Remove I/P bolt caps by carefully prying with a small flat head screwdriver.
3. Remove I/P upper trim panel screws.

Upper Trim Panel Removal

4. Lift I/P upper trim panel at clip locations on rear edge to disengage clips.
5. Pull I/P upper trim panel rearward out of clips at bottom of windshield.

NOTE: Be careful, when removing or replacing I/P upper trim panel, not to damage VIN plate.

6. Remove I/P upper trim panel.

NOTE: Be careful, when removing upper trim panel, not to damage the upper trim panel seal (SL/SW only).

ABS/PCM Bracket|Page 3151 > < ABS/PCM Bracket